12/08/10 Started building roads, locations and pits
12/20/10 Drilling rig moving on location; Baggett 1D drilled to 420′, will resume drilling tomorrow.
12/21/10 Baggett 1D encountered Gunsight Sand at 712′-718′; samples saturated with oil, blew oil on pits; lower sand 720′-737 increased oil saturation in samples 50% to 70%, producing oil to TD at 780′.
12/22/10 Cemented 773′ of 5 1/2″ production casing on Baggett 1D, Formation continued to produce good oil returns during circulation and cementing.; Spud Baggett 2D drilled to 480′, will resume drilling tomorrow.
12/23/10 Baggett 2D encountered Gunsight Sand 714′-734′ with moderate oil shows; 20′ of pay section with 20% to 30% oil saturation in samples, TD 780′; Shut down for Christmas will set 5 1/2″ production casing Monday 12/27/10
12/27/10 Cemented 760′ of 5 1/2″ production casing on Baggett 2D; Drilling delayed on Baggett 3D. Drilling rig shut down for repairs, waiting on parts.
01/07/11 Rig repairs should be completed today. Drilling tentatively scheduled to resume middle of next week, weather permiting.
01/14/11 Resumed drilling; Baggett 3D drilled 500′, shut down over weekend will resume again Monday
01/17/11 Baggett 3D encountered Gunsight Sand 710′-725′; 10′ pay section with 50%-70% oil saturation in samples; lower sand 738′-740′ oil saturation 10%-20%; TD 780′; Drilling rig moved to Baggett 4D location and drilled 200′
01/19/11 Baggett 4D encountered Gunsight Sand 702′-725′ approximately 14′ high on structure; 18′ pay section with very good oil saturation 80%-90% in samples; lower sand 730′-740′; 6′ pay section with 10%-15% oil saturation; formation produced good oil returns (in drilling fluids) to TD at 780′
01/21/11 Cemented 759′ of 5 1/2″ production casing on Baggett 4D; Formation continued to produce moderate oil returns during circulation and cementing; Spud Baggett 5D drilled to 320′ will resume drilling Monday
01/24/11 Baggett 5D no upper Gunsight Sand, lower Sand 730′-736′ tight dense Sand/Limestone mixed, slight odor, no shows; TD 760. Cemented 780′ of 5 1/2″ of production casing on Baggett 3D; Formation produced slight oil returns circulation and cementing.
01/25/11 Baggett 6D drilled 520′
01/26/11 Baggett 6D encountered Gunsight Sand 720′-736′ tight dense Sand/Limestone mixed, minor drilling breaks no oil shows; encountered deeper sand section 885′-920′, 35′ section very fine grain, medium dense sandstone formation TD 980′. Baggett 5D plugged and abandoned. Baggett 7D drilling permit amended and location moved to offset Baggett 1D 300′ to the North West.
01/27/11 Staked new location for 7D, cleared brush, built location.
01/28/11 Cemented 980′ 4 1/2″ casing on Baggett 6D for use as water source/disposal well. Spud Baggett 7D drilled 420′ will resume drilling Monday.
01/31/11 Baggett 7D encountered Gunsight Sand 714′-725′ with good oil shows; 11′ pay section 60%-70% oil saturation; lower Sand 728′-744′ moderate oil shows; 16′ pay section 20%-40% oil saturation. Formation produced slight oil returns (in drilling fluids) from Pay zones to TD at 780′. Cemented 778′ of 5 1/2″ production casing. Well produced slight oil returns to pit during cementing operations.
02/16/11 Century Wireline running cased hole logs on Baggett wells.
03/02/11 Satterfield Wire line Svc. perforated the Baggett 1D from 704′-710′ and 718′-728′; Baggett 4D 706′-716′ and 721′-731′; Baggett 3D 704′-712′ and 716′-726′
03/03/11 Satterfield Wire Line Svc perforated Baggett 7D 718′-728′; Baggett 2D 708′-716′ and 720′-728
03/04/11 Satterfield Wire line Svc. perforated Baggett 6D from 898′-910′
03/07/11 Basic Energy Svc. Acidized Baggett 1D and 6D; Acidized and Fraced Baggett 2D, 3D, 4D and 7D
03/08/11 Dailey Well Svc. started swabbing back treatment fluid from Baggett 1D, 2D, 3D, 4D, and 7D; Baggett 1D fluid 100′ from surface over night. Swabbed down shut in 20 minutes well produced 1 1/2 barrels fluid in casing with good oil cut 80%. Dailey Well Svc. to run pump, rods, and tubing on 1D and resume swabbing back frac fluid from Baggett 2D, 3D, 4D and 7D tomorrow.
03/09/11 Swabbed back Baggett 2D, 3D, 4D and 7D; Baggett 4D oil cut 30%-40% improving with each run; 3D starting producing gas, oil cut also improving with each run; 2D and 7D swabbing back frac water.
03/10/11 Baggett 4D 250′ fluid in casing over night 80%-90% oil; Baggett 3D 350′ fluid over night 10% oil, improving with each swab run; Baggett 7D 300′ fluid in casing over night starting to produce gas and slight oil cut improving with each swab run; Baggett 2D 200′ fluid in casing over night still getting back frac water with slight gas and oil cut.
03/11/11 Started building location for tanks. Started running pumps, rods and tubing. Electric service hook up scheduled for next Friday.
03/18/11 Electric service established.
03/21/11 Pumping units installed, flow lines and electric wires buried.
03/22/11 Tanks and Gun Barrel delivered and set up.
03/23/11 Started Connecting Tanks and Gun Barrel lines to wells.
03/24/11 Finished making conections; wells turned on and pumping oil to the tanks at 12 noon.